In this step-by-step guide, we’ll show you how to install your 40×40×1.8cm PP floor grates in just 5 steps.
Step 1: Prepare & Clean the Ground
Start with a flat, dry, clean surface.
· Sweep away dust, dirt, gravel, and debris.
· Remove oil stains or wet spots (dry completely).
· Check for bumps or cracks—level small uneven areas if needed.
A clean base ensures the grates lock tightly and last longer.

Step 2: Plan Your Layout
All our tiles are 40×40×1.8cm, fully interchangeable.
Tips:
· Start from a corner or straight edge (wall/door).
· Mix hollow drainage grates in wet zones (washing bays, poolside).
· Use solid anti-slip covers in dry zones (entry, showroom, gym).
· Leave a small gap along walls for thermal expansion (prevents buckling).
You can cut edge tiles easily with a utility knife or jigsaw for a perfect fit.

Step 3: Snap the Tiles Together
This is the easiest part—tool-free interlocking design.
1. Place the first tile flat on the ground.
2. Align the male/female edges of the next tile.
3. Press down firmly until you hear a click—it locks securely.
4. Continue row by row, left to right, front to back.
No glue, no nails, no mess. Just snap and go.

Step 4: Install Edge Trims (Optional)
For a neat, finished look, add edge strips around the perimeter.
· Edge trims hide raw tile edges.
· Protect tiles from lifting or tripping.
· Give your floor a professional, polished finish.

Step 5: Finish & Enjoy Your New Floor
Once all tiles are locked:
· Walk over the floor to check for loose connections.
· Adjust any misaligned tiles.
· Rinse the floor lightly to remove dust.
Done! Your new 1.8cm PP interlocking floor is ready for use—park cars, wash vehicles, walk, or work immediately.

Why Our 1.8cm PP Grates Are Perfect for DIY
✅ 100% virgin PP: Strong, durable, anti-aging, UV-resistant✅ 1.8cm thickness: Balanced strength & flexibility✅ 40×40cm standard size: Easy to handle & install✅ Hollow + solid series: For all wet/dry scenarios✅ Anti-slip surface: Safe for cars, heavy equipment & foot traffic✅ Easy maintenance: Sweep, wipe, or pressure wash✅ Replaceable: Swap single tiles if damaged
Best Uses for Your PP Floor Grates
· ✅ Residential & commercial garages
· ✅ Car washes & auto detailing shops
· ✅ 4S dealerships & workshops
· ✅ Warehouses & industrial floors
· ✅ Patios, poolside & outdoor walkways
· ✅ Gym platforms & fitness areas
Ready to Install Your New Floor?
Shop our full collection:
· Hollow drainage grates: Square hole, 3D textured, plain, 600g heavy-duty
· Solid anti-slip covers: Steel plate, round texture, X-pattern, diamond pattern
All tiles are 40×40×1.8cm, 100% virgin PP, interlocking & interchangeable.
Dominio Floors – Your trusted source for premium PP interlocking floor grates.
Need bulk 1.8cm PP interlock floor for your garage project? Contact us for factory wholesale price & free layout plan.